Turn attachment (TG)
-
This attachment is used as a pulling jig to use for the measurement of the power of traction.
Application Load Cell Type：SHU, SHE, RCT, RTD, RTU, RTE, DB, DBS.
Appearance
Dimensions
unit : mm
| Model | A | ΦB | C | D | E | F | G | H | I | J | K | L |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TGA-12 | 86 | 60 | 45 | 24.5 | 31 | 10 | M12×1.75 | 26 | M12×1.75,25 deep | 22 | M4 | 5 |
| TGA-16 | 111 | 80 | 60 | 29.5 | 38 | 13 | M16×2 | 32 | M16×2,28 deep | 27 | Ｍ57.5 | 15 |
| TGA-24 | 163 | 115 | 91 | 44.5 | 54 | 18 | M24×2 | 47 | M24×2,42 deep | 41 | M6 | 10 |
| TGA-36※1 | 260 | 175 | 143 | 59.5 | 94 | 23 | M36×2 | 84 | M39×2,53 deep | 55 | M8 | 10 |
| TGA-40※1 | 391 | 230 | 200 | 84 | 81.5 | 28 | M40×2 | 71.5 | M50×2,70 deep | 80 | M10 | 15 |
| TGA-48※1 | 327 | 230 | 200 | 84 | 99 | 28 | M48×3 | 89 | M50×2,70 deep | 80 | M10 | 15 |
| TGB-6 | 52 | 34 | 25 | 12 | 20 | 7 | M6×1 | 15 | M6×1,12 deep | 10 | M3 | 3 |
| TGB-14 | 86 | 60 | 45 | 24.5 | 31 | 10 | M14×1.5 | 26 | M12×1.75,25 deep | 22 | M14 | 5 |
| TGB-18 | 129 | 80 | 60 | 29.5 | 56 | 13 | M18×1.5 | 50 | M16×2,28 deep | 27 | M5 | 7.5 |
| TGB-24 | 178 | 115 | 91 | 44.5 | 69 | 18 | M24×1.5 | 62 | M24×2,42 deep | 41 | M6 | 10 |
| TGB-28 | 167 | 115 | 91 | 44.5 | 58 | 18 | M28×1.5 | 51 | M24×2,42 deep | 41 | M6 | 10 |
| TGB-36※1 | 243 | 175 | 143 | 59.5 | 77 | 23 | M36×2 | 67 | M39×2,53 deep | 55 | M8 | 10 |
| TGB-40※1 | 245 | 175 | 143 | 59.5 | 79 | 23 | M40×1.5 | 69 | M39×2,53 deep | 55 | M8 | 10 |
| TGB-50※1 | 347 | 230 | 200 | 84 | 119 | 28 | M50×2 | 109 | M50×2,70 deep | 70 | M10 | 15 |
| TGB-54※1 | 329 | 230 | 200 | 84 | 109 | 28 | M54×2 | 91 | M50×2,70 deep | 70 | M10 | 15 |
| TGC-18 | 116 | 80 | 60 | 29.5 | 43 | 13 | M18×1.5 | 37 | M16×2,28 deep | 27 | M5 | 5 |
| TGE-12 | 73 | 50 | 43 | 20 | 25 | 5 | M12×1.25 | 15 | M12×1.25,16 deep | — | M3 | 3 |
| TGF-12 | 83 | 70 | 52 | 20 | 26 | 5 | M12×1.25 | 15 | M12×1.25,16 deep | — | M3 | 3 |
* Items with Marks (※1) are produced only on order placed.